Air feed slitter / cutter / creaser / perforator / digital print finishing system - Most paper printed on the today’s digital printers can easily be finished on the X. The patented Tri-suction Feeding Mechanism does not require complicated double feed adjustments. Just load paper, select the volume of air, and the paper will be fed consistently. It also helps prevent the machine from stopping due to double feeds or paper jams.The new ejection pause function allows the first card to be paused at the machine’s eject port which helps an operator to place the card guide plates exactly where they should be according to the card width.The Aerocut X can read barcodes printed on the leading edge of prints. Its check function alerts the operator when a mismatch is detected between the print and machine settings. The change function automatically adjusts the machine settings according to the barcode scanned and the job recalled. These functions can be switched according to the occasion. The X comes with a PC software (Lytrod Intellicut*) that allows operators the ability to impose, format, and add personalized information to documents for fast and efficient finishing. Job programs are sent to the finishing machine through ethernet. The Aerocut X has detachable rollers that make it easy to clean the rollers themselves and inside of the machine, as well as provide easy access to the area in the event of a paper jam. Similarly, the perf and crease units can be removed too.